TLO Carbon Seatpost for Folding Bike

Like all products in the TLO series, the Schmolke straight full carbon seatposts are hand-wound from the best prepregs available on the market to suit your weight and riding style. The head clamps the saddle frame at 4 points. Thanks to the slightly rounded aluminium clamping parts and the large contact surface of the carbon half-shell, even sensitive carbon saddle racks are not subjected to excessive stress. The saddle mount is designed for both oval and round saddle racks. The width must not exceed 8 mm and the height 12 mm.

The 5 mm Ti6Al4V titanium bolts are designed as expansion bolts to withstand even MTB stresses without damage.

The tube is only constructed from up to 23 extremely thin layers of carbon fibre prepreg in the particularly stressed areas. In the stress-free zones, this number drops to 7 layers. Unfortunately, this sophisticated construction is very complex and cannot be done in Asia.

Cheaper seatposts are only built with a constant wall thickness, which greatly simplifies production but adds unnecessary weight. For lightweight carbon seatposts in particular, countless test bench trials are necessary to work out the optimum design for each length and diameter. We also take into account different rider weights so that we do not supply the heavy standard seatpost for light riders, as companies with standard production have to do.

Ordering

The seatposts are reinforced where they are loaded by the seatpost clamp, so they must not be sunk too far into the frame! Please do not buy a seatpost that is too long in order to saw it off! We want to customise the overall length of your seatpost as much as possible. Therefore, please measure the extension of the post from the top edge of the frame to the centre of the saddle rails. You can then use this measurement to determine the required overall length of your carbon seatpost using the table above. If, for example, your exposed seatpost length is 400 mm, the 550 mm seatpost is the best for you (length outside the frame in mm 370 – 450). The 500 mm seatpost would be too short (length outside the frame in mm 320 – 400). Please let us know the measured extension! 

The Seatpost length as measured from the top of the frame to the middle of the saddle rails.

Weave options

All Schmolke lightweight carbon seatposts are unpainted to avoid adding unnecessary weight. Above all, the epoxy surface is much more resistant than any paint finish. It is therefore not scratched as quickly. All our lightweight carbon seatposts come in the current matt look. TLO seatposts can be ordered in 1k weave or UD. 1k is the classic carbon look with (biaxial) crossed fibres. With UD (unidirectional), all carbon fibres run in one direction. This gives the surface a uniform black, almost painted look. In general, UD carbon parts are a few grams heavier than 1K carbon parts

Colour

To create the perfect look on your bike, all TLO seatposts are available in 3 different logo colours: Schmolke Edition (red / white), Black Edition and White Edition.

Installation 

Download installation manual TLO road seatpost

Download installation manual TLO MTB seatpost

Specifications