A lighter seatpost for your ENVE Melee or Fray, made to fit its proprietary aero seat tube. Choose Straight (0mm) or +15mm setback to suit your riding position.
Compatibility: ENVE Fray and the original ENVE Melee. This post does not fit the Melee V2 released in September 2026. If your bike was sold as a 2026 Melee, check which generation you have before ordering.
Choose your offset
Straight (0mm) places the saddle clamp further forward. +15mm setback places it further back. ENVE’s original setback post has 20mm of offset, so Darimo’s +15mm option is not an exact positional replacement. If you want to preserve your current fit, check your existing offset or send us a side-on photo before ordering.
Choose your seatpost length
Set your saddle to your normal riding height. Measure from the top of the frame’s seat tube, where the post enters the frame, to the centre of the saddle rails. Follow the line of the seatpost when measuring, then use the table below.
| Darimo post length | Measurement above the frame |
|---|---|
| 250mm | 100–175mm |
| 300mm | 145–220mm |
| 350mm | 190–265mm |
| 400mm | 235–310mm |
If your measurement fits two lengths, the shorter post generally saves more weight. It must still meet the required insertion depth and clear any obstruction inside your frame. Unsure which to choose? Send us your measurement, frame size and a photo of your current setup. We’ll help you select the right length before you order.
Frequently asked questions
Does this fit the ENVE Melee V2?
No. The Melee V2, released in September 2026, uses a different proprietary seatpost. This Darimo post is for the original Melee and the Fray.
How do I tell which Melee I own?
Check whether your bike is identified as the original Melee or the Melee V2. The year alone is not enough: original Melee bikes were also sold in 2026. If you’re unsure, send us a photo of the bike and its existing seatpost before ordering.
Should I choose Straight or +15mm setback?
Choose based on the saddle position you need. Straight places the saddle clamp further forward; +15mm setback places it further back. ENVE’s original setback post is 20mm, so Darimo’s +15mm version may require an adjustment to the saddle’s position on its rails. If you need to preserve your current fit, send us a side-on photo before ordering.
How do I measure for the correct length?
With the saddle at your normal riding height, measure from the top of the seat tube to the centre of the saddle rails, following the line of the post. Compare that measurement with the table above. Choose by your actual measurement rather than frame size alone.
My measurement fits two lengths. Which one should I order?
The shorter length generally saves more weight. The longer length gives you more room to raise the saddle later. Either choice must meet the required insertion depth and fit inside your frame. Send us your measurement and frame size if you’d like us to check.
I weigh more than 90kg. Can I order this post?
Yes. Tell us your rider weight when ordering and Darimo will reinforce the post accordingly. The reinforcement adds less than 20g to a 400mm post.
Need help choosing? Send us your bike model, current offset, exposed-post measurement and a side-on photo. We’ll help you get the fit right.